Installing
the Squeak-Relief brace is a simple 60
second process. For ease of
installation all braces now come with the
Quick-tack holding pin for simplifying
positioning. This truly is a DIY ( do-it-yourself)
permanent fix. Click
to enlarge photo. To make
installation virtually foolproof,
each brace is precision machined to
guarantee the exact depth and position of
the screws. And with each of the screws (1
1/4" and 3") having a different
diameter (thickness), you can only insert
the correct screw into the correct hole,
making it virtually impossible to screw
it up (pun intended!).
What makes Squeak-Relief
so effective is that the brace and screws
(all working at a 30 degree angle)
actually pull and lock the floor in
position. Once you eliminate the
movement, you eliminate the root cause of
all squeaks.
With
Squeak-Relief, pre-drilling is never
required and under normal circumstances,
it should only take one brace to make a
repair. The SR-100 kit contains 6 braces
and special length screws for six
seperate repairs.
 |

|
| Step 1 -
Locate the squeak and insert the
brace. |
Step 2 - Tap in
the Quick -tack brace-pin to hold
in place |

|

|
| Step
3 -Fasten the 2
screws ( shortest one first) |
NOW - Kick back
and relax ..the job's done..
perminently ! |
|